• Bed Receiver
  • Tang, recoil lug, 1" of barrel with epoxy bedding - $60
  • Full receiver area and above with epoxy bedding - $75
  • Pillar bedding - $85
  • Full length epoxy bedding - $90
  • Pressure pad bedding - $15
• Trigger Adjustment
  • Lighten factory trigger - $65
  • Install Premium trigger - $40 + trigger
  • Fix  "handy man" trigger - $55 (no garuantee)
• Smooth Bolt Raceways - $ 25
• Drill & Tap per hole - $25 each (hardened - $40 each)
• Mount & Bore sight scope - $20
• Correct Headspace (set back) - $100
• Install new barrel - $150 +
• Cut new crown - $50
• Thread barrel for brake - $110
• Blueprint rifle
  • Lap lugs, true receiver face, bolt face, rechamber to minimum headspace, install new recoil lug on models with removal lugs, check extractor/ejector, check/adjust firing pin protrusion, check/adjust safety and trigger - $300+
• Remove Broken Case - $35
• Remove Live Round - $125.00
• Clean & Inspect - $45